News & Events

Events

There are no recent news or events to display at this time. New Articles and Events are entered periodically. Please check back shortly for updates.

News

Automated Dynamics Develops Scalable Workcell For Research And Development

SCHENECTADY, N.Y., December 13, 2011 - Automated Dynamics today announced it has introduced the Research Workcell to its standard equipment line. The Research Workcell is a small scale, self-contained robotic automated fiber placement machine designed to be an affordable and flexible piece of research and development equipment for higher education clients and small composites laboratories.

Automated Dynamics’ Resumes Production After Irene Flooding

SCHENECTADY, N.Y., September 1, 2011 - Like many businesses throughout New York, Automated Dynamics, a leading manufacturer of advanced composite structures and high performance processing equipment, was adversely affected by the flooding caused by Hurricane Irene.

Located in downtown Schenectady, near the banks of the Mohawk River, Automated Dynamics' 45,000 sq. ft. headquarters building and manufacturing plant shut down Sunday, August 28, due to flooding and an area wide electric power shutdown.

Automated Dynamics Integrating Use Of Laser-Based Heating Method For Fiber Placement Of Composite Materials

SCHENECTADY, N.Y., August 30, 2011 - Automated Dynamics announced today that it is testing the use of a laser-based heating method for the production of fiber placed composite materials. The laser-based heating method is currently being integrated into Automated Dynamics' fiber placement technology and will be used to replace and/or supplement hot gas for heating.

Automated Dynamics honored with Technology in Production Award by the Center for Economic Growth

SCHENECTADY, N.Y., July 6, 2011 — Automated Dynamics announced today that it has been presented with the 2011 Center for Economic Growth (CEG) Technology in Production Award at CEG’s 15th Annual Technology Awards Luncheon on June 29, 2011, at the Crowne Plaza in Albany, N.Y.

Automated Dynamics granted Canadian patent for continuous production of reinforced thermoplastic pipes

SCHENECTADY, N.Y., June 2 2011 — Automated Dynamics, a leading manufacturer of advanced composite structures and high performance processing equipment, today announced that it has been granted Canada Patent No. CA 2465302 for a process that allows for the continuous production of reinforced thermoplastic pipes. The Canadian grant follows on the heels of being granted U.S. Patent No.

Automated Dynamics Achieves AS9100 Certification

SCHENECTADY, N.Y., January 10, 2011 - Automated Dynamics, a leading manufacturer of advanced composite structures and high performance composite processing equipment, announced it has completed registration to AS9100, the standardized quality management system for the aerospace industry. The designation is the result of the company passing stringent audit requirements and evaluations of its manufacturing processes to achieve a standard of quality required in the aerospace industry.

Automated Dynamics awarded contract by Concordia University to develop automated fiber placement robotic workcell

SCHENECTADY, N.Y., January 4, 2011 - Automated Dynamics announced today that it is developing an automated fiber placement (AFP) robotic workcell for Concordia University's Concordia Center for Composites (CONCOM). The six-axis robot will fabricate simple to complex geometries, including cones, flat laminates, open and closed sections with convex and/or concave shapes, triangles, box beams, cylinders, ovals and more.

Automated Dynamics hires new Engineering Assistant

SCHENECTADY, N.Y., November 29, 2010 - Graham Ostrander joins Automated Dynamics as an Engineering Assistant. Graham has a B.S. in Mechanical Engineering from Rensselaer Polytechnic Institute and a B.S. in Physics from the State University of New York at Oneonta.

Automated Dynamics hires new Marketing Assistant

SCHENECTADY, N.Y., November 1, 2010 - Automated Dynamics announces that Caroline Berta will be joining the marketing department. Caroline is a graduate of Quinnipiac University, majoring in Public Relations with a minor in Marketing.

Automated Dynamics manufactures and installs machine for Mitsubishi Rayon Co. in Japan

SCHENECTADY, N.Y., October 26, 2010 — Automated Dynamics announced today that it has successfully built and installed a new robotic fiber placement machine for Mitsubishi Rayon Co. (MRC) and the University of Tokyo in Japan.

Automated Dynamics develops carbon fiber composite component for deep-sea use

SCHENECTADY, N.Y., September 22, 2010 — Automated Dynamics announced that it has developed a high-performance carbon fiber composite hydraulic pump with Cameron, a leading provider of flow equipment products, systems and services to worldwide oil, gas and process industries. The new machine component was displayed at the 2010 Offshore Technology Conference in Houston, Texas.

Thriving in a high-tech niche (Times Union / Albany, NY)

SCHENECTADY, N.Y., September 4, 2010 - While many manufacturers across the state are languishing in the recession, Automated Dynamics Inc. of Schenectady is seeing a surge in business.

Automated Dynamics’ XT series fiber placement robot for 2010 featured on cover of SAMPE Journal

Automated Dynamics' XT series fiber placement robot for 2010 Automated Dynamics’ XT series fiber placement robot for 2010 was featured on the cover of the September/October issue of SAMPE Journal.

Automated Dynamics delivers machine to GKN Aerospace

SCHENECTADY, N.Y., July 29, 2010 — Automated Dynamics announced today that it has delivered a new piece of high-performance composite processing equipment to GKN Aerospace. The machine has been installed in GKN’s new pre-production facility on the Isle of Wight, United Kingdom, which will be at the heart of the next developments in the Environmental Lightweight Fan (ELF) research program. The program’s goal is to develop an all-composite engine fan blade that will improve aircraft engine performance and reduce emissions.

Automated Dynamics receives NYSERDA grant

May 2010: Schenectady, NY- Automated Dynamics and NYSERDA are working together to reduce energy consumption in New York state. NYSERDA has awarded Automated Dynamics with a grant of $396,000.00 that will be used to upgrade ADC's existing HGT (hot gas torch) technology with high efficiency laser technology. This new laser heating technology for thermoplastic fiber placement (TPFP) equipment will provide higher process efficiencies, improved productivity, and business growth.

Automated Dynamics Ships Machine to Tokyo

February 2010: Schenectady, NY- Mitsubishi Rayon Company accepted and approved shipment for Automated Dynamics’ Thermoplastic Matrix Composite Fiber Placement Workcell. MRC will be using the machine for research and development projects. The machine will be installed at the University of Tokyo and will be in commission late spring.

Automated Dynamics awarded grant to be used for increased productivity

January 2010: Schenectady, NY - Automated Dynamics is the recipient of a $35,000 grant from the National Grid Manufacturing Productivity Program. The mission of the program is to help manufacturers improve their productivity and performance. At ADC, the grant money will be used to help pay for AS9100 training, Lean Manufacturing training, and Eureka Winning Ways training. These trainings are designed to help companies increase their overall efficiency while eliminating waste.